Pipe and piping components that help in pipe routing for directional changes, size changes, and branch connections. Piping Elbows, Piping Reducers, Tee Connections, Olet Connections, Caps, Crosses, etc are pipe fittings and are widely used in both the piping and plumbing industry.
What is a reducer in piping? A reducer is a kind of pipe fitting (accessory) which is used in process piping to change the pipe size from a big bore to a smaller bore pipe. Mostly reducer use for a change in pipe size to meet flow requirements of the process system or connect to […]
What is Latrolet fitting? Latrolet is a type of self-reinforcing branch fitting accessories for pipe-line. As its names represent how that will connect to the run pipe (header pipe). Latrolet fitting was developed by a company called Bonney Forge. And this is mostly suitable for small bore branch connection pipes. A Latrolet is available in
What is a threadolet used for? Threadolet is used for 90 degree self-reinforcing branch accessories for pipe line fitting. As its names represent how that will connect to the run pipe (header pipe). Threadolet is a type of self-reinforced branch fitting developed by a company called Bonney Forge. And this is suitable for small bore
What is a Sockolet used for? Sockolet is used for 90 degree self-reinforcing branch accessories for pipe line fitting. As its names represent how that will connect to the run pipe (header pipe). Sockolet is a type of self-reinforced branch fitting developed by a company called Bonney Forge. And this is suitable for small bore
Definition of Weldolet? Weldolet fitting is one of the most common types of piping components and this is a type of Olets. This is used for take branch connection from run pipe lines to branch pipe line and connected by butt weld welding process with 90° branch connection. In weldolet both ends will be beveled, mostly
Pressure Safety Device Pressure Safety devices (valve) is the safety device that is used to protect the other equipment and piping system. This is used as a protection device for mechanical equipment and other systems. The Pressure Safety Device is designed to open and release the excess pressure from the system after that again recover
ASME B16.5 Introductions This is an American standard for pipe flanges and flanges fitting to size NPS 1/2 through NPS 24 metric/inch, all temperature pressure, dimension, tolerance and materials, and its testing and methods of designate opening of pipes flanges and fittings cover within its. For example flange rating class designated as follow 150, 300,
Troubleshooting of the Piston valve Troubleshooting refers to the process of identifying, analyzing, and resolving problems or issues in a system or process. It involves a systematic approach to identify the root cause of a problem or failure and then implementing appropriate solutions to rectify the issue. Troubleshooting can be applied to a wide range
What is a SORF Flange? SOFR flanges are essential components of many pipelines, machines and other equipments. A SORF flange (Slip On Raise Face) is a type of flange that is designed to be easily installed with welding or bolting. It comprises four parts– two raised faces, a hub bore, and bolts or studs used
Bolt flange selection chart In this chapter Pipe flange dimensions and details will be covered in ASME B16.5 – In this standard, consider Pipe Flanges and Flanged Fittings for size NPS ½” to 24”. More than 24″, from NPS 26” to 60” should be in ASME B16.47. Here only given details for 150 and 300
Butterfly valve (API 609) Butterfly valve is also called a quarter turn valve, this type of valve used for shutoff, regulating and starting the flow. The operation is either in open condition or fully closed of the disc in side body. In some applications it is also used as an alternative to a ball or
Top interview question answer about glove valve Why globe valve used in steam application in place of the ball valve? Actually nowadays a variety of ball valves are available in the industry. Due to new technology we can’t judge the globe used for steam lines and ball valves can’t. The main reason is that clearance