Grow Mechanical

All Types of Pipe Fittings Used in Piping pdf

Pipe Fittings Pipe fittings are used to connect pieces of pipe together, as well as provide strength and stability to piping systems. Depending on the type of fitting, they can be used to control flow, change direction, or even assist with insulation and noise reduction by providing a seal at connections. Pipeline fittings are an […]

SPLIT-CASE PUMPS

What is Split-Case Pumps | types | application

What is a Split-Case Pump? A split-case pump is a type of centrifugal pump that has two separate casing halves, that are bolted together. This design allows for easy access to the internal parts and maintenance without disassembling the entire pump. The impeller is located in the center and rotates inside the casing, which creates

types of centrifugal pumps

Centrifugal pumps and their applications

Types of centrifugal pumps and their applications There are various types of centrifugal pumps available, including end-suction pumps, split-case pumps, multistage pumps, and more. Each type of pump has its own unique characteristics and is best suited for specific applications. Split-Case Pumps Multistage Pumps End-Suction Pumps Self-Priming Pumps Vertical Turbine Pumps Regenerative Turbine Pumps There

Gate valve vs angle valve

Troubleshooting of Gate Valve Part 5

Understanding Gate valves Gate valve is commonly used in industries such as oil and gas, chemical processing, and water treatment. They are used to control the flow of liquids and gases through a pipeline or system. These valves work by using a gate that slides up and down to regulate the flow. It is important

Piston valve

Gate Valve vs. Ball | Piston | Globe Valves

Gate valves: pros and cons Gate valves are commonly used in industries where low fluid resistance and tight sealing are necessary. They operate by either completely opening or closing the gate inside the valve body to control the flow of fluids. One of the main advantages of gate valves is their ability to shut off

Gate valve selection factor

Gate Valve Operation: Selection and Material

Understanding Gate Valve Operation and Selection Gate valves are essential components in many industries and play a crucial role in controlling fluid flow. There are many operation types, including rising stem, non-rising stem, and multi-turn. Rising stem valves offer greater visibility of the valve position while non-rising stem valves require less vertical space for installation.

Gate valve definition and Parts name

Gate Valves selection application and design

Gate valve definition and introduction Gate valve is a type of linear motion valve that uses a gate or wedge-shaped disc to control the flow of fluid through a pipeline. When the gate is fully open, it allows the fluid to flow freely through the valve, and when it is fully closed, it completely blocks

The Fundamentals of RCM Maintenance

RCM Maintenance Definitions RCM (Reliability Centered Maintenance) is a maintenance strategy that focuses on maximizing the reliability of equipment and minimizing the risk of failure. It is a systematic approach to maintenance that is based on identifying and prioritizing maintenance tasks based on the risk of equipment failure. And By assessing risks and utilizing preventative

TYPES OF BOLTS VS SCREW

Selection of Fasteners for your application

FASTENERS DEFINITIONS A fastener is a type of hardware used to attach two objects together through a mechanical process. Examples of fasteners include rivets, nuts and bolts, studs, screws, washers, eyebolts, and nails. Bolted connections most commonly use threaded metal bolts with nuts to hold two components firmly together. Alternatively, screws engage with matching threads

mechanical engineer

Roles and Responsibilities for Mechanical Engineer​

Roles and Responsibilities A mechanical engineer has an open opportunity to select his carrier according to interests like sector Plant and product design, Plant and product development, construction, Procurement of mechanical equipment, reliability and maintenance of mechanical equipment and devices, Automobile engineer, engineering services, research, and development, and manufacturing. The roles, skills, and responsibilities change

Materials of Construction ASTM Standard

Pipeline Materials And Construction

Pipeline Pipelines are an integral part of any industry, and the materials used in their construction need to be chosen for optimal performance and safety. In this guide, learn about how different components contribute to successful pipeline design and construction, and how modern materials are being employed in the industry today. Pipe Materials Selection When

ASMEANSI B16.9 Elbow Dimensions chart

ASME/ANSI B16.9 Elbow Dimensions chart

What Are ASME/ANSI B16.9 Fittings? ASME/ANSI B16.9 fittings standard specification are cover only the butt weld fittings. That are followed to connect pipes with other fittings components in industrial piping systems. These fittings are made from a wide variety of materials, like carbon steel, stainless steel, alloy steels, nickel alloys, and titanium for high-temperature applications.

Grow Mechanical